You can use the Automatic T-shirt Bag on Roll Making Machine by following easy steps. This machine has smart automation. It helps you make bags faster. It also makes each bag better. Here are some benefits you will see right away:

Always follow each step to get the best results. This will help you stay safe while using your T-shirt bag making machine.

• The Automatic T-shirt Bag machine helps you work faster. It makes bags quicker than doing it by hand.
• You need to take care of the machine often. Clean it and check its parts so it does not break. This helps the machine last longer.
• Safety is very important. Always wear safety gear when you use the machine. Know how to stop the machine in an emergency.
• Change the settings slowly and carefully. Make sure the film is tight and the cuts are right. This helps you make good bags.
• You must learn how the machine works. If you know what to do, you make fewer mistakes. This helps you make more bags.
•  

Unpacking and Inspection

When you get your Automatic T-shirt Bag machine, start by opening the box carefully. Take out each part and place them on a clean surface. You want to make sure nothing is missing or damaged. Look at the instruction manual and check off each item as you go.

Before you plug in the machine, inspect it for common issues. Here’s a quick checklist you can use:

• Listen for any strange noises from the stepper motor. If you hear anything odd, you may need to adjust or repair it.
• Check the film feeding size. If the size looks off, the sensitivity or switches might need attention.
• Look at the photoelectric eye. If it doesn’t track the film correctly, you should adjust it or check the film quality.
• Test the discharge speed. If it’s slow or the machine acts weird, check the switches and circuit board.
• Inspect the cutting area. Uneven cuts can mean the tool is worn out or not set up right.
• Examine the film for breaks or glue leaks. Poor film quality or tension problems can cause these.
• Notice any vibration or loud sounds. These could mean installation issues or worn accessories.
• Watch the bag making speed. If it’s slow, check the tension and speed settings.
• Make sure the motor runs smoothly. Problems here might come from the motor or power supply.
• Try the control panel. If it doesn’t work, you may need to replace it and reset the program.

Tip: Always double-check every part before you start. This helps you avoid problems later and keeps your Automatic T-shirt Bag machine working well.

 

Loading Film Roll

Now you’re ready to load the film roll. Most Automatic T-shirt Bag machines work with high pressure polyethylene film and low pressure polyethylene film. Pick the film that matches your bag needs.

Follow these steps:

1. Place the film roll on the holder. Make sure it sits straight and tight.
2. Pull the film through the guide rollers. Keep it smooth and flat.
3. Line up the film with the die cutting area. This helps the machine cut each bag perfectly.
4. Check the tension. If the film feels too loose or too tight, adjust the tension knob.

Note: Using the right film type makes your bags stronger and helps the machine run smoothly.

 

Adjusting Components

You need to set up a few key parts before you start making bags. Adjusting these components helps you get the best results.

• Set the die cutting blade. Make sure it lines up with the film. This gives you clean cuts every time.
• Adjust the vacuum waste removal system. This feature pulls away scraps and keeps your workspace neat.
• Check the roll label loader. It lets you switch jobs quickly and keeps things organized.
• Test the sensors and tracking system. These help the machine follow the film and cut each bag to the right size.

Here’s a table showing how some features make setup easier:

Remember: Adjust each part carefully. Small changes can make a big difference in how your Automatic T-shirt Bag machine works.

 

Power On

You are ready to start your Automatic T-shirt Bag machine. First, you need to power it on safely. Follow these steps to make sure everything goes smoothly:

1. Place the machine in its final spot. Make sure it sits on a flat surface.
2. Attach the big parts, like the unwinding stand and conveyor table.
3. Connect the main power supply to the control cabinet. Check that each wire matches the label.
4. Load the film onto the unwinding stand. Thread it through the rollers.
5. Use the PLC touchscreen to turn on the machine. Run a test cycle to check if everything works.

Before you press the start button, you should always check for safety. Here’s a table to help you remember what to look for:

Tip: Always double-check safety devices before you start. This keeps you and your team safe.

Setting Parameters

You want your bags to look perfect. The machine uses a computer-controlled servo motor to help you set everything just right. Here’s what you can do:

• Use the touchscreen to set the length of each bag. The servo motor makes sure every bag is the same size.
• Pick the sealing temperature and speed. The computer system helps you adjust these settings quickly.
• Set the punching and cutting options. The machine can punch handles and cut the bags in one go.
• Check the sensors. They help the machine feed, seal, cut, punch, and move the bags without mistakes.

You don’t need to worry about making tiny changes by hand. The computer system does most of the work for you. You just need to enter your numbers and press start.

Note: If you want to change the bag size or material, you can update the settings on the control panel. The servo motor will adjust everything for you.

Starting Production

Now you can start making bags. Here’s how you do it:

1. Prepare the resin and load it into the extruder if you are making your own film.
2. Extrude the resin to create plastic film.
3. Print designs on the film if you want custom bags.
4. Feed the film into the machine. The machine will cut and seal the film to make bags.
5. Watch the bags as they come out. Check the size and sealing to make sure they look good.
6. Pack the finished bags for delivery.

The Automatic T-shirt Bag machine can change the core automatically and punch handles while making bags. You don’t need to stop the machine to do these jobs. This saves you time and helps you make more bags in less time.

Tip: Always keep an eye on the first few bags. If you see any problems, stop the machine and fix the settings.

PPE

You want to stay safe while working with your bag making machine. Personal protective equipment (PPE) helps you avoid injuries. Here’s what you should wear every time you operate the machine:

• Safety Glasses: These protect your eyes from flying bits of plastic or dust.
• Gloves: Heat-resistant gloves keep your hands safe from hot parts and sharp edges.
• Ear Protection: Machines can get loud. Earplugs or earmuffs help protect your hearing.
• Safety Shoes: Steel-toed shoes shield your feet from heavy objects that might fall.

Tip: Always check your PPE before you start. If anything looks worn out, replace it right away.

Safe Use

You need to follow smart steps to keep yourself and others safe. Training makes a big difference. Make sure you know how the machine works before you use it. Read the operator’s manual. It explains how to set up, run, and fix the machine.

Here are some important safety steps:

• Get proper training on setup, operation, and emergency actions.
• Inspect the machine before each use. Look for loose wires or broken parts.
• Keep all guards in place. These stop you from touching moving parts.
• Use lockout procedures when you clean or fix the machine. Turn off the power first.
• Handle materials with care. Lift with your legs, not your back.
• Keep fire extinguishers nearby. Remove flammable items from your workspace.
• Control noise by wearing ear protection.

You should also check the machine’s auto-stop features. These help prevent accidents and keep you safe. Take a look at this table:

Emergency Stop

Accidents can happen fast. You need to know how to stop the machine right away. Find the emergency stop buttons before you start working. These buttons are easy to reach and shut down the machine instantly.

If you see a problem, press the emergency stop. The machine will halt and keep you safe. Practice using the emergency stop during training. This helps you react quickly if something goes wrong.

Remember: Safety comes first. Always pay attention and use the right gear. Your careful actions protect you and everyone around you.

Common Issues

Sometimes, your Automatic T-shirt Bag machine might stop or act up. Don’t worry. You can fix most problems with a few simple checks. If you notice the film is not feeding right, try these steps:

• Check if the belts press too tightly against the tube. Loosen them if needed.
• Look at the film drive gear boxes and couplings. Make sure they move smoothly.
• Inspect the cables and the film feed motor. Replace any damaged wires.
• Check the bearings in the belt drive shaft. Worn bearings can slow things down.
• Lower the vertical seal temperature and pressure. High heat can make the film stick.
• Clean the belts and check the vacuum system. Dirt or weak suction can cause slipping.

Tip: If you hear strange noises or see the film bunching up, stop the machine and check these areas first.

Routine Care

Taking care of your machine helps it last longer and work better. You don’t need to be an expert. Just follow a simple schedule. Here’s a handy table to guide you:

Note: Regular care keeps your machine running smoothly and helps you avoid big repairs.

Cleaning

A clean machine makes better bags. You should remove debris every day. Give your machine a deep clean each week. This stops jams and keeps your bags looking sharp.

• Wipe down all surfaces and clear away scraps.
• Check for worn parts during each cleaning.
• If you run your machine a lot, clean it more often.

Remember: Clean machines work faster and break down less. Make cleaning part of your daily routine.

Productivity

You want to get the most out of your Automatic T-shirt Bag machine. Start by planning your workday. Set clear goals for how many bags you want to make. Organize your workspace so you can move quickly and safely. Keep your film rolls and tools close by. This saves you time when you need to reload or fix something.

Try to use the machine’s automatic features. Let the core changing and in-line punching do the hard work. You can focus on checking the bags and packing them. If you notice the machine slowing down, check the tension and speed settings. Small changes can help you make more bags in less time.

Tip: Track your daily output in a notebook or on your computer. This helps you spot patterns and improve your process.

Reducing Errors

Mistakes can slow you down and waste materials. You can avoid most errors by following a few simple steps:

• Train yourself and your team. Learn how the machine works before you start.
• Check the film quality before loading it. Bad film can cause jams and poor seals.
• Watch the machine as it runs. Look for uneven cuts or missed punches.
• Clean and maintain the machine often. Dust and scraps can cause problems.
• Organize your materials. Keep film rolls and tools in the right place.

Here are some common sources of errors you should watch out for:

• Inadequate training for operators
• Poor quality control
• Inefficient material management
• Neglecting machine maintenance

Note: Fix small problems right away. This keeps your production smooth and your bags looking great.

Best Practices

You can make your job easier by following best practices every day. Always read the operator’s manual before you start. Set up a cleaning schedule and stick to it. Use checklists to inspect the machine and your materials.

Try these best practices:

Stay alert and ask questions if you are unsure about something. You can always learn new ways to improve your work.

You now know how to set up, run, and care for your Automatic T-shirt Bag on Roll Making Machine. Always follow safety steps and keep your workspace clean. Regular maintenance helps you get better results and saves money. Here’s why you should make maintenance a habit:

• You boost machine efficiency and bag quality.
• You prevent breakdowns and extend the machine’s life.
• You save on repair costs.

Check your manual for more tips and advanced fixes. Stay safe and keep your machine running strong!

How often should you clean the machine?

You should clean your machine every day. Wipe down surfaces and remove scraps after each use. A weekly deep clean helps prevent jams and keeps your bags looking sharp.

What film types work best with this machine?

You can use high pressure or low pressure polyethylene film. Always check the film quality before loading. Good film helps your machine run smoothly and makes stronger bags.

What should you do if the machine stops suddenly?

First, press the emergency stop button. Check for jams or loose wires. Restart the machine after fixing the problem. If it keeps stopping, call a technician.

Can you change bag sizes easily?

Yes! Use the touchscreen to set a new bag length. The servo motor will adjust the machine for you. You can switch sizes without taking the machine apart.